Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light bulb of the Peugeot 3008?

Model: Peugeot 3008 MK 1, T84 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light bulb

See other generations:
Video tutorial

To replace the rear light bulb of the Peugeot 3008, open the tailgate to access the protective panel located next to the light assembly: this panel must be removed to loosen the screws underneath. Once loosened, you can extract the light assembly from its housing and disconnect its connector at the back: this will allow you to remove the bulb inside and replace it with a new spare part.

After replacing, refit and reconnect the light assembly in its housing.


Updated on 13 October 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Fog Light Bulb on a Peugeot 3008?
How to Replace the Rear Fog Light Bulb on a Peugeot 3008?
Peugeot 3008 (2016-2023 / P84, MK 2) To replace the rear fog light bulb on a Peugeot 3008, you need to access the inside of the rear bumper from underneath the vehicle: here you will fin…
How to Replace the Rear Light Bulb on a Peugeot 3008
How to Replace the Rear Light Bulb on a Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) To replace the rear light bulb on a Peugeot 3008, open the tailgate and then pry off the small vertical panel next to the light. Once this panel is r…
How to Replace the Rear Fog Light on the Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) Today, see the instructions on how to remove and replace the rear fog light and bulb on the Peugeot 3008. First, move to the rear and start unscrewin…

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos