Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Fog Light on the Peugeot 3008

Model: Peugeot 3008 MK 1, T84 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Fog lights

See other generations:
This video is currently unavailable

Today, see the instructions on how to remove and replace the rear fog light and bulb on the Peugeot 3008. First, move to the rear and start unscrewing the screws of the fog light on the inside of the rear bumper; then disconnect the electrical connector of the bulb to remove it, as shown in the video.

At this point, replace either just the bulb or the entire fog light, securing it to the rear bumper; connect the electrical wiring and check its operation, following the video tutorial to the end!


Updated on 2 October 2026 by ScegliAuto


Related tutorials

How to Replace the Fog Light on the Peugeot 3008
How to Replace the Fog Light on the Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) In this guide, you will learn how to correctly and safely replace the fog light on your first-generation Peugeot 3008. First, park the car on a flat …
How to disassemble the rear headlight of the Peugeot 3008 and 5008
How to disassemble the rear headlight of the Peugeot 3008 and 5008
Peugeot 3008 (2009-2016 / MK 1, T84) The right rear light of the Peugeot 3008 can be removed from its housing following the same procedure used for removing the rear light of the Peugeot…
How to remove the rear light of the Peugeot 3008
How to remove the rear light of the Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) Today's instructions will allow us to disassemble and replace the rear light and its bulbs of the Peugeot 3008. First, we open the rear hatch of the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos