Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear bumper of a Peugeot 3008

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Rear bumper

In this video, we will see how to remove the rear bumper from a Peugeot 3008: first, we will need to remove the screws located inside the wheel arch, then there are three metal points on each side between the wheel arch and the rear part of the bumper. We will then find three screws that connect the plastic part to the bodywork. Opening the rear hatch, we will find a clip to remove from the inside. Once this is done, we can remove the clips that hold the two parts of the rear bodywork together, pulling towards us the part we intend to remove. Let's do it gently, to avoid breaking the clips.

Posted on 19 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper from a Peugeot 3008?
How to Remove the Rear Bumper from a Peugeot 3008?
Peugeot 3008 (2009-2016 / T84, MK 1) To remove the rear bumper from a Peugeot 3008, use a tool to pry off the trims surrounding the rear wheel arches: underneath, you will find the screw…
How to Replace the Rear Bumper on a Peugeot 3008
How to Replace the Rear Bumper on a Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) How to replace the rear bumper on a Peugeot 3008? Follow these steps, which are not too complex if done in order: use a screwdriver or battery-powere…
How do you remove the rear bumper of the Peugeot 3008, 2nd generation?
How do you remove the rear bumper of the Peugeot 3008, 2nd generation?
Peugeot 3008 (2016-2023 / MK 2, P84) The most common reasons for disassembling a bumper, in this case the rear bumper of the second series Peugeot 3008, are repair following a collision,…

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos