Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the engine hood in the Peugeot 3008?

Model: Peugeot 3008 MK 2, P84 - Years 2016-2023
Part: Body

In this tutorial we can see how to open the engine hood in the Peugeot 3008, an extremely simple operation that is not different from the typical procedure of most vehicles. First, we unlock the locks using the remote control, then we open the driver's door, locate the lever located in the lower left area of the cabin and activate it by pulling it towards us. Then we move in front of the vehicle, locate the second lever and, holding it down, lift the hood. To close it, simply let it fall gently.

Posted on 6 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the fuel filter of the Peugeot 3008 1
Replacement of the fuel filter of the Peugeot 3008 1
Peugeot 3008 (2009-2016 / T84, MK 1) To replace the diesel filter of the Peugeot 3008, open the hood, remove the engine cover, disconnect the electrical connector and the three fuel line…
How to open the bonnet of a Peugeot 3008
How to open the bonnet of a Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) To open the bonnet of a Peugeot 3008, sit in the driver's seat and locate the release lever situated at the bottom of the dashboard on the driver's s…
How do you replace the battery of the Peugeot 3008?
How do you replace the battery of the Peugeot 3008?
Peugeot 3008 (2009-2016 / T84, MK 1) In order to replace the battery of the Peugeot 3008, you need to open the hood to access the components inside the engine compartment. Once the hood …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos