Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the bonnet of a Peugeot 3008

Model: Peugeot 3008 MK 1, T84 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

To open the bonnet of a Peugeot 3008, sit in the driver's seat and locate the release lever situated at the bottom of the dashboard on the driver's side. Pull it fully to release the bonnet's safety catch.

Then, move to the front of the vehicle and insert your hand under the edge of the bonnet to locate the secondary safety lever. Move it sideways or upwards, depending on the version, while slightly lifting the bonnet.

Once the second catch is released, lift the bonnet until it is fully open. Finally, secure the bonnet using the support rod or check that the gas struts hold it open safely.


Posted on 7 June 2026 by ScegliAuto


Related tutorials

How to Open the Bonnet on a Peugeot 3008?
How to Open the Bonnet on a Peugeot 3008?
Peugeot 3008 (2016-2023 / P84, MK 2) In this tutorial, you will learn how to open the bonnet on a Peugeot 3008. This operation is extremely simple and follows the typical procedure for m…
How to replace the battery on a Peugeot 3008?
How to replace the battery on a Peugeot 3008?
Peugeot 3008 (2009-2016 / MK 1, T84) To replace the battery on a Peugeot 3008, open the bonnet to access the components inside the engine compartment: once the bonnet is open, locate the…
Replacing Battery on Peugeot 3008
Replacing Battery on Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) Replacing the battery on a Peugeot 3008? Remove the old battery and install a new one. Open the car door and pull up the engine compartment release l…

    Frequently Asked Questions

    • 3008 2009-2016 - Why does the display of the Peugeot 3008 not work? Read answer
    • 3008 2016-2023 - Why does the Peugeot 3008 screen not light up? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos