Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper from a Peugeot 3008?

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Rear bumper

To remove the rear bumper from a Peugeot 3008, use a tool to pry off the trims surrounding the rear wheel arches: underneath, you will find the screws securing the bumper, which need to be loosened. Then, open the tailgate and locate the screws situated at the top of the bumper; these must be found along with those at the bottom of the bumper. Now, the piece can be completely detached from its housing and replaced with a new one.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear bumper of a Peugeot 3008
How to disassemble the rear bumper of a Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) .. In this video, we will see how to remove the rear bumper from a Peugeot 3008: first, we will need to remove the screws located inside.. …
How do you remove the rear bumper of the Peugeot 3008, 2nd generation?
How do you remove the rear bumper of the Peugeot 3008, 2nd generation?
Peugeot 3008 (2016-2023 / MK 2, P84) The most common reasons for disassembling a bumper, in this case the rear bumper of the second series Peugeot 3008, are repair following a collision,…
How to Replace the Rear Bumper on a Peugeot 3008
How to Replace the Rear Bumper on a Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) How to replace the rear bumper on a Peugeot 3008? Follow these steps, which are not too complex if done in order: use a screwdriver or battery-powere…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos