Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bumper on a Peugeot 3008

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Hydraulic pistons

How to replace the rear bumper on a Peugeot 3008? Follow these steps, which are not too complex if done in order: use a screwdriver or battery-powered drill to unscrew the mounting bolts located at the top of the bumper (detach the plastic rivets). Unscrew the screws located at the bottom of the bumper, then remove the screws (plastic rivets) on the sides of the wheel arch; once the bumper is free from any screws or bolts, grasp it with your hands and pull it away from the bodywork (disconnect any power cables). Carry out the necessary repair or replacement.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper from a Peugeot 3008?
How to Remove the Rear Bumper from a Peugeot 3008?
Peugeot 3008 (2009-2016 / T84, MK 1) To remove the rear bumper from a Peugeot 3008, use a tool to pry off the trims surrounding the rear wheel arches: underneath, you will find the screw…
How to Remove the Front Bumper on a Peugeot 3008 MK2
How to Remove the Front Bumper on a Peugeot 3008 MK2
Peugeot 3008 (2016-2023 / MK 2, P84) In today's video, you will see how to remove the front bumper on a second-generation Peugeot 3008 by following these simple steps. First, unscrew all…
How to replace the rear fog light of the Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) Today we will see the instructions on how to disassemble and replace the rear fog light and bulb of the Peugeot 3008. First, let's move to the rear p…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos