Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Drum Brake Shoes on a Piaggio Ape?

Model: Piaggio Piaggi
Part: Brake drums and shoes

Video tutorial

To replace the rear drum brake shoes on a Piaggio Ape, the first step is to safely lift the vehicle using a jack and place it on axle stands to prevent movement. Once secure, remove the rear wheel to access the brake drum.

The drum may be a bit difficult to remove due to rust or accumulated dust, so you may need to use a rubber mallet to help loosen it. After removing the drum, you will have access to the shoes. The shoes are held in place by tension springs and pins, which must be carefully removed to avoid damaging surrounding components.

Once the old shoes are removed, compare them with the new ones to ensure they are identical. Proceed to install the new shoes, reinserting the tension springs and ensuring they are securely fastened.

After everything is correctly assembled, replace the drum and wheel, and lower the Piaggio Ape from the jack. Before driving off, it is essential to test the brake to ensure it functions correctly by performing some light braking to allow the new shoes to adapt to the drum.


Updated on 27 October 2026 by ScegliAuto


Related tutorials

How to replace the spark plug on the Piaggio PX
How to replace the spark plug on the Piaggio PX
Piaggi Today we will explain how to replace the spark plug on a scooter by yourself. To remove the spark plug on a Piaggio PX vehicle, we need to use a spec…
How to Set the Time on a Piaggio
How to Set the Time on a Piaggio
Piaggi Setting the time on a Piaggio model 1 is a very simple operation that can be done independently, aided by our brief video tutorial. First, turn on th…
How the instrument cluster works on the Piaggio X9
How the instrument cluster works on the Piaggio X9
Piaggi In today's video, we will see how the instrument cluster works on the Piaggio X9. First, turn on the scooter. Locate the four primary buttons on eith…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos