Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Piaggi
Part: Clock

Setting the time on a Piaggio model 1 vehicle is a very simple operation that can be done independently, thanks to our short video tutorial. First, turn on the instrument panel of the scooter without starting the engine, then press and hold the SET button for about 5 seconds. When the clock starts flashing, release the SET button and then press it to set the hours and minutes. To confirm, press the OK button next to it. Finally, turn off and turn on the instrument panel to confirm the time setting procedure. This operation is the same for all Piaggio vehicles.

Posted on 13 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How the instrument cluster works on the Piaggio X9
How the instrument cluster works on the Piaggio X9
Piaggi In today's video, we will see how the instrument cluster works on the Piaggio X9. First, turn on the scooter. Locate the four primary buttons on eith…
How to replace the spark plug on the Piaggio PX
How to replace the spark plug on the Piaggio PX
Piaggi Today we will explain how to replace the spark plug on a scooter by yourself. To remove the spark plug on a Piaggio PX vehicle, we need to use a spec…
How to disassemble the front headlight of the Piaggio X7
How to disassemble the front headlight of the Piaggio X7
Piaggi Today we will explain how to replace the front headlight of the Piaggio X7. The first step to be carried out is to remove the emblem from the scooter…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos