Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Piaggi
Part: Headlight

Today we will explain how to replace the front headlight of the Piaggio X7. The first step to be carried out is to remove the emblem from the scooter, located right in the middle. To remove the emblem, we will have to pry it off with a flat-head screwdriver. The second step to be carried out is to unscrew the screw located under the emblem to remove the front plastic cover. The third step to be carried out is to unscrew the screws located on the top of the headlight. The fourth step is to unscrew the bottom screws of the headlight in order to remove it. From here on, we can proceed with the replacement of the bulbs or the headlight itself.

Posted on 23 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to set the time on a Piaggio
How to set the time on a Piaggio
Piaggi Setting the time on a Piaggio model 1 vehicle is a very simple operation that can be done independently, thanks to our short video tutorial. First, t…
How to replace the spark plug on the Piaggio PX
How to replace the spark plug on the Piaggio PX
Piaggi Today we will explain how to replace the spark plug on a scooter by yourself. To remove the spark plug on a Piaggio PX vehicle, we need to use a spec…
How the instrument cluster works on the Piaggio X9
How the instrument cluster works on the Piaggio X9
Piaggi In today's video, we will see how the instrument cluster works on the Piaggio X9. First, turn on the scooter. Locate the four primary buttons on eith…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos