Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Let's see how to open the storage compartment of the Piaggio Beverly. The storage compartment opens with the ignition key inserted, so it is necessary to do this operation and turn on the instrument panel, pressing it and turning it to the right, and in this way the storage compartment is open. Being able to open the storage compartment only with the key inserted is a security measure, which prevents access to the drawer by potential wrongdoers, but it can be a problem if the scooter's battery is dead and therefore prevents the vehicle from starting. In this case, the best thing to do is to use a booster to restart the battery, which is located under the footboard.

Posted on 10 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to open the seat of the Piaggio Beverly 300
How to open the seat of the Piaggio Beverly 300
Beverly 300 The information provided in this guide will show us how to open and close the seat of the Piaggio Beverly 300 scooter, in simple and quick steps. Fir…
Headlight adjustment on Piaggio Beverly 300
Headlight adjustment on Piaggio Beverly 300
Beverly 300 Through this very useful video tutorial, we can see the entire operation necessary to adjust the headlight on a Piaggio Beverly 300/350. This operati…
Replacing the Battery of the Piaggio Beverly 300
Replacing the Battery of the Piaggio Beverly 300
Beverly 300 Briefly, we will see the instructions that will allow you to remove and replace the battery of the Piaggio Beverly 300 scooter. First, place the scoo…

How to Replace the Headlight Bulbs on the KTM RC 200?

As shown in this tutorial, replacing the headlight bulbs on the KTM RC 200 is an extremely simple and quick task. First, ensure that the key is not inserted for safety. Then, approach the headlight in question, locate the bulb holder, and turn it slightly counter-clockwise. Once done, disconnect the power connector, attach the new bulb, and reassemble everything. Avoid touching the glass of the replacement bulb directly with your bare hands, as any residues could cause it to overheat.

Watch the video!


by ScegliAuto

More videos