Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front shield of the Piaggio Beverly 500

Model: Piaggio Beverly 500
Part:

Video tutorial

Today we will explain in a simple and quick way how to disassemble the front shield of the Piaggio Beverly 500. We start the disassembly of the shield by removing the central emblem using an electric screwdriver. After removing the central emblem, we unscrew the upper diagonal screws and the lower diagonal screws.

We unscrew the side screws and remove the shield by pulling it upwards, being careful not to damage the plastic clips. Disassembling the shield can be useful when we need to replace the bulb of the front hole or perform maintenance and control work on the electronic part.


Posted on 30 July 2025 by ScegliAuto


Related tutorials

How to Replace the Speedometer Cable on a Piaggio Beverly 500?
How to Replace the Speedometer Cable on a Piaggio Beverly 500?
Beverly 500 You can replace the speedometer cable on a Piaggio Beverly 500 by loosening the screws that secure the inner cover of the front shield of the scooter…
Change the Bulb on a Piaggio Beverly 500
Change the Bulb on a Piaggio Beverly 500
Beverly 500 To change the bulb on the Beverly 500, be very careful and ensure you get the correct H4 bulb with the notch, as pointed out by the YouTuber. He made…
How to access the fuse box of the Piaggio Beverly 500
How to access the fuse box of the Piaggio Beverly 500
Beverly 500 In this guide we will see the steps on how to access the fuse box of the Piaggio Beverly 500 scooter. First, we put the scooter on the stand and star…

How to Replace the Variator of the Honda PCX 125

This guide outlines the steps to remove and replace the variator of the Honda PCX 125 scooter. First, place the scooter on its centre stand and begin by removing the clutch cover by unscrewing the fastening screws. Next, unscrew the central nut of the fan and the one on the clutch bell, then remove the belt and the variator, as shown in the video. Now, install the new variator with the new rollers, reassemble the belt and the entire transmission, and finally refit the cover!

Watch the video!


by ScegliAuto

More videos