Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
It will be possible to disassemble the engine of the Piaggio Typhoon by loosening the screws that fix the engine block to its housing: the latter will be located in the lower center part of the frame. Once the fixing screws of the supports have been removed, it will be necessary to proceed by loosening the screws that fix the cylinder to its seat: it will then be possible to detach it in order to identify the piston inside. This can now be detached so that access to the crankshaft and all necessary components is obtained: then it will be necessary to replace them and reassemble the engine.

Posted on 18 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Transmission on the Piaggio Typhoon 125?
How to Replace the Transmission on the Piaggio Typhoon 125?
Typhoon 125 You can replace the transmission on the Piaggio Typhoon 125 by loosening the screws that secure the transmission cover located near the rear wheel: t…
How do you replace the rear shock absorber of the Piaggio Typhoon 125?
How do you replace the rear shock absorber of the Piaggio Typhoon 125?
Typhoon 125 To replace the rear shock absorber of the Piaggio Typhoon 125, you need to loosen the screws that secure the piece to its housing: this will be locat…
How do you replace the ignition switch of the Piaggio Typhoon 125?
How do you replace the ignition switch of the Piaggio Typhoon 125?
Typhoon 125 In order to replace the ignition switch of the Piaggio Typhoon 125, you need to loosen the screws that secure the inner panel of the front fairing of…

How to replace the headlight bulbs on a Suzuki GSXR 600?

In this tutorial, you will see how to replace the headlight bulbs on a Suzuki GSXR 600, an extremely simple and quick operation. First, ensure that the key is not inserted, then unscrew the two indicated screws and separate the dashboard from the support. Next, disconnect the power connectors of the bulbs, remove the rubber caps, and unclip the metal clips to extract the bulbs from their respective housings. At this point, you can insert the replacements, avoiding touching the glass directly with your bare hands, and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos