Do it yourself
Frequently asked questions about cars and motorcycles
To replace the handbrake cable of the Piaggio MP3, you will need to loosen the lower end, which is located near the brake caliper on the front wheel. Once the caliper has been removed from the disc, you will need to locate the handbrake cable that is connected to the caliper. By loosening the nut that secures the handbrake cable to the disc, you will be able to completely remove the old cable. The new cable can then be inserted back in place so that everything can be secured with the screws, and its operation can be checked properly.

Posted on 8 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Mp3 To replace the spark plug on the Piaggio MP3, you need to loosen the screw that secures the panel located on the left side of the bike, in the area b…
Mp3 In this short and simple guide, see how to remove and replace the rear light bulb of the Piaggio MP3 scooter, following the instructions below. First…
Mp3 Before you begin, sit on the seat of your Piaggio MP3. Start by pressing and holding the right button located at the bottom of the instrument panel. …

How to Remove the Engine from a KTM EXC 300?

To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos