|
Do it yourself
| |||
| ||||
Model: Piaggio Mp3
In this short and simple guide, see how to remove and replace the rear light bulb of the Piaggio MP3 scooter, following the instructions below. First, place your scooter on the centre stand and lift the rider's seat; then unscrew the fixing screws located under the light unit to remove it, as shown in the video. At this point, remove and replace the bulbs with new ones of the correct type; insert them correctly into the bulb holder and reassemble the rear light, applying the reverse procedure!
Updated on 25 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Mp3
Before you begin, sit on the seat of your Piaggio MP3. Start by pressing and holding the right button located at the bottom of the instrument panel. …
Mp3
To change the engine oil of the Piaggio MP3, loosen the drain plug of the oil tank and position a container directly underneath it: the drain plug is…
Mp3
In this brief and simple guide, see the steps to remove and replace the front windscreen of the Piaggio MP3 scooter, following the instructions below…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.116
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
