Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb of the Piaggio MP3?

Model: Piaggio Mp3
Part: Tail light bulb

Video tutorial

To replace the rear light bulb of the Piaggio MP3, open the rear compartment to access the screws inside that secure the corresponding light. Once the screw is loosened, you can pull the light out from its housing, disconnecting the connector at the back.

This will allow you to remove the bulb from inside the light and insert the new replacement. After the replacement, reposition the light in its housing, reconnect it, and secure it with the appropriate screw.


Updated on 1 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on the Piaggio MP3
How to Replace the Rear Light Bulb on the Piaggio MP3
Mp3 In this short and simple guide, see how to remove and replace the rear light bulb of the Piaggio MP3 scooter, following the instructions below. First…
How to Replace the Headlight Bulb on a Piaggio MP3
How to Replace the Headlight Bulb on a Piaggio MP3
Mp3 To replace the headlight bulb on the Piaggio MP3, loosen the screws securing the windscreen and the fairing directly above the headlight. Once these …
How to Replace the Front Headlamp Bulb on the Piaggio MP3
How to Replace the Front Headlamp Bulb on the Piaggio MP3
Mp3 To replace the front headlamp bulb on the Piaggio MP3, loosen the screws securing the front panel of the scooter, which can then be completely detach…

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos