Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the spark plug on a Piaggio Beverly 300?

Model: Piaggio Beverly 300
Part: Spark plugs

Video tutorial

To replace the spark plug on the Piaggio Beverly 300, you will need to loosen the screws that secure the right side cover panel of the motorcycle, located near the footrest area. Once this panel is removed, you will be able to locate the ignition coil underneath.

This coil must be disconnected in order to remove it and access the spark plug beneath. You can remove the spark plug using the appropriate socket wrench and then install the new one. After installing the spark plug, you can reinsert the coil to check that everything is functioning properly.


Posted on 2 January 2026 by ScegliAuto


Related tutorials

Replacing the Spark Plug on a Piaggio Beverly 300ie
Replacing the Spark Plug on a Piaggio Beverly 300ie
Beverly 300 In this brief guide, we will cover the steps to remove and replace the spark plug on the Piaggio Beverly 300ie scooter. First, remove the left side p…
How to Replace the Air Filter on the Piaggio Beverly 300 iE
How to Replace the Air Filter on the Piaggio Beverly 300 iE
Beverly 300 To replace the air filter on the Piaggio Beverly 300 iE, you need to loosen the screws that secure the cover of the casing located on the left side o…
How to Replace the Exhaust on a Piaggio Beverly 300?
How to Replace the Exhaust on a Piaggio Beverly 300?
Beverly 300 To replace the exhaust on a Piaggio Beverly 300, loosen the screws located at the top and bottom to detach the plastic protective trim. Once the trim…

How to Change the Engine Oil in a Yamaha YZF R-125?

In this tutorial, see how to change the engine oil in a Yamaha YZF R-125, a very simple and quick operation to perform every 12 months. First, ensure the engine is cool enough, then position a container underneath and remove the lower right fairing. Next, locate the drain bolt, loosen it using a socket spanner, and remove the secondary filter. At this point, open the main filter housing, replace it, reassemble everything, and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos