Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight on the Honda CMX500 Rebel

Model: Honda Rebel 500
Part: Headlight

Video tutorial

In this tutorial, we will see how to replace the front headlight on the Honda CMX500 Rebel, a very simple and quick operation. First, ensure that the dashboard is off for safety, then locate the four bolts on either side of the headlamp and unscrew them using a Torx T30 key. Next, grasp the headlight, separate it from the base, and disconnect the power connector.

At this point, transfer the bulbs to the replacement if necessary, connect it, and reassemble everything by following the reverse procedure.


Posted on 5 November 2026 by ScegliAuto


Related tutorials

How to Set the Time on the Honda Rebel 500?
How to Set the Time on the Honda Rebel 500?
Rebel 500 In this tutorial, you will see how to set the time on the Honda Rebel 500, a very simple and quick operation, for example, after disconnecting the ba…
How do you replace the exhaust pipe of the Honda Rebel 500?
How do you replace the exhaust pipe of the Honda Rebel 500?
Rebel 500 It will be possible to replace the exhaust installed on the Honda Rebel 500 by loosening the screws that fix the component to its housing, on the rig…
How to Change the Engine Oil of a Honda Rebel 500?
How to Change the Engine Oil of a Honda Rebel 500?
Rebel 500 To change the engine oil of a Honda Rebel 500, first, lift the bike using a stable stand to easily access the drain plug. Under the engine, locate th…

How to Change the Engine Oil in a Ducati Panigale 959?

As shown in this tutorial, changing the engine oil in a Ducati Panigale 959 is an extremely simple and quick operation. First, ensure the engine is sufficiently cool, then position a container underneath the bike, locate the drain bolt and unscrew it using a 14mm spanner. Allow all the oil in the system to drain out, then open the filter cap and remove it. At this point, insert the replacement, reassemble everything, and add the required amount of oil through the designated hole.

Watch the video!


by ScegliAuto

More videos