Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Water Pump on the Aprilia Leonardo 150

Model: Aprilia Leonardo
Part: Brake rotors

Video tutorial

Below is the guide and instructions needed to remove and replace the rear wheel and rear brake disc on the Aprilia Leonardo 150 scooter. First, place your scooter on the centre stand and begin by removing the exhaust silencer, unscrewing the fastening screws; then remove the rear wheel by disconnecting the brake caliper from the disc, as illustrated in the video.

At this point, unscrew the brake disc bolts and replace it with the new one; reassemble the braking system and the rear wheel!


Updated on 3 August 2026 by ScegliAuto


Related tutorials

Leonardo This guide outlines the steps to perform routine maintenance by changing the engine oil on an Aprilia Leonardo scooter. First, place the scooter on i…
Leonardo In today's tutorial video, you will see the instructions to dismantle and replace the drive belt on the Aprilia Leonardo 125 scooter. First, place yo…
Leonardo Today, discover the instructions that will allow you to remove and replace the rear brake pads of the Aprilia Leonardo 125 scooter. First, place your…

How to Replace the Coolant in the KTM XC 300

Follow this guide on how to replace the coolant in the KTM XC 300 enduro bike, as well as the XC-W 300. First, place your bike on a stand and start by unscrewing the coolant drain screw located at the bottom of the water pump casing, allowing it to drain into a container for about ten minutes; then unscrew the radiator cap as shown in the video. At this point, top up with new coolant suitable for your radiator, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos