Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Drive Belt on the Aprilia Leonardo 125

Model: Aprilia Leonardo
Part:

Video tutorial

In today's tutorial video, you will see the instructions to dismantle and replace the drive belt on the Aprilia Leonardo 125 scooter. First, place your scooter on the centre stand and begin by removing the side cover of the transmission.

Next, undo the nut from the clutch bell, also removing the cooling fan as shown in the video. Now, remove the drive belt and, if necessary, the variator along with the rollers.

Then, refit the new components by following the reverse procedure!


Updated on 23 June 2026 by ScegliAuto


Related tutorials

How to Remove the Belt, Variator, and Rollers on the Aprilia Leonardo 125
How to Remove the Belt, Variator, and Rollers on the Aprilia Leonardo 125
Leonardo Let’s briefly go through the steps to remove and replace the variator, rollers, and drive belt of the Aprilia Leonardo 125 scooter. First, place your…
How to replace the rear brake pads of the Aprilia Leonardo 125
How to replace the rear brake pads of the Aprilia Leonardo 125
Leonardo Today, discover the instructions that will allow you to remove and replace the rear brake pads of the Aprilia Leonardo 125 scooter. First, place your…
How to Replace the Rear Wheel Bearing on the Aprilia Leonardo 125
How to Replace the Rear Wheel Bearing on the Aprilia Leonardo 125
Leonardo This guide provides instructions to remove and replace the rear wheel bearing on the Aprilia Leonardo 125 scooter. First, place your scooter on the c…

How to Replace the Fuel Filter on a Triumph Scrambler?

In this tutorial, you will see how to replace the fuel filter on a Triumph Scrambler, a very simple and quick operation to be performed approximately every 24 months. To do this, you will first need to remove the fuel tank, which is also a straightforward task. Start by placing the tank upside down, preferably on a soft cloth, then unscrew the 12 fixing bolts of the aluminium plate using an 8mm socket wrench. Next, extract the entire pump assembly, disconnect the filter hoses, and securely attach them to the replacement. Finally, reinsert the pump into the tank along with a new gasket and reassemble everything.

Watch the video!


by ScegliAuto

More videos