Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, discover the instructions that will allow you to remove and replace the rear brake pads of the Aprilia Leonardo 125 scooter. First, place your scooter on the centre stand and begin to unscrew the suspension mounting bolt; then unscrew the bolts of the rear brake caliper to remove it from the disc, as shown in the video. At this point, remove the old brake pads and press the caliper piston to retract it; install the new original brake pads, finally refitting the caliper onto the disc!

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Wheel Bearing on the Aprilia Leonardo 125
How to Replace the Rear Wheel Bearing on the Aprilia Leonardo 125
Leonardo This guide provides instructions to remove and replace the rear wheel bearing on the Aprilia Leonardo 125 scooter. First, place your scooter on the c…
How to Replace the Water Pump on the Aprilia Leonardo 150
How to Replace the Water Pump on the Aprilia Leonardo 150
Leonardo Below is the guide and instructions needed to remove and replace the rear wheel and rear brake disc on the Aprilia Leonardo 150 scooter. First, place…
How to Replace the Drive Belt on the Aprilia Leonardo 125
How to Replace the Drive Belt on the Aprilia Leonardo 125
Leonardo In today's tutorial video, you will see the instructions to dismantle and replace the drive belt on the Aprilia Leonardo 125 scooter. First, place yo…

How to Reset the Oil Service on the Yamaha YZF-R25?

In this tutorial, see how to reset the oil service on the Yamaha YZF-R25, a very simple and quick operation. Before proceeding, ensure that all required scheduled maintenance tasks are completed. Start by inserting the key and turning on the instrument panel; it is not necessary to start the engine. Then, by repeatedly pressing the left button on the dashboard, navigate to the mileage interval labelled "OIL". Once done, press and hold the right button for about 5 seconds, or for the time necessary to reset the interval correctly.

Watch the video!


by ScegliAuto

More videos