Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide outlines the steps to perform routine maintenance by changing the engine oil on an Aprilia Leonardo scooter. First, place the scooter on its centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; afterwards, clean the drain plug to refit it later. At this point, unscrew the filler cap and pour in the new engine oil of the correct type; fill it up to the maximum level indicated in the owner's manual.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil and oil filter on the Aprilia Leonardo
How to replace the engine oil and oil filter on the Aprilia Leonardo
Leonardo To ensure the proper functioning of the engine and its longevity, it is necessary to regularly replace the engine oil and oil filter; let’s see how t…
How to Replace the Drive Belt on the Aprilia Leonardo 125
How to Replace the Drive Belt on the Aprilia Leonardo 125
Leonardo In today's tutorial video, you will see the instructions to dismantle and replace the drive belt on the Aprilia Leonardo 125 scooter. First, place yo…
How to Dismantle the Engine of the Aprilia Leonardo?
How to Dismantle the Engine of the Aprilia Leonardo?
Leonardo To dismantle the engine of the Aprilia Leonardo, loosen the bolts securing it within its housing: once all the mounting bolts for the supports are lo…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos