Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil of a Honda Rebel 500?

Model: Honda Rebel 500
Part: Engine oil

Video tutorial

To change the engine oil of a Honda Rebel 500, first, lift the bike using a stable stand to easily access the drain plug. Under the engine, locate the oil drain plug and remove it with an appropriate spanner, allowing the old oil to drain into a container.

Ensure that the engine is completely emptied. After the oil has fully drained, refit the drain plug, making sure it is securely tightened.

Next, add the new engine oil through the designated opening, using a funnel to avoid spills. Check that the new oil is well distributed and free of leaks.

Finally, lower the bike and check the oil level to ensure it is correct and, if necessary, add more oil.


Updated on 19 October 2026 by ScegliAuto


Related tutorials

Rebel 500 It will be possible to replace the exhaust installed on the Honda Rebel 500 by loosening the screws that fix the component to its housing, on the rig…
Rebel 500 In this tutorial, you will see how to set the time on the Honda Rebel 500, a very simple and quick operation, for example, after disconnecting the ba…
Rebel 500 In this tutorial, we will see how to replace the front headlight on the Honda CMX500 Rebel, a very simple and quick operation. First, ensure that the…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Replace the Front Headlamp on a Royal Enfield Scram 411?

In this tutorial, you will see how to replace the front headlamp on a Royal Enfield Scram 411, a very simple and quick operation. First, ensure that the key is not inserted, then locate the two bolts on either side of the lamp and undo them using a 6 mm hex key. Remove the lower screw with a 4 mm key, extract the headlamp from its housing, and remove the internal cover. At this point, disconnect the power connector, transfer the outer plastic ring to the replacement part, and reassemble by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos