Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter in the BMW R1200 GS

Model: Bmw R1200gs
Part: Air filter

Video tutorial

In today's video, you will perform a very simple maintenance task on the BMW R1200 GS. Specifically, you will replace the air filter in the BMW R1200 GS. Start by removing the fuel tank from the motorcycle's bodywork. Remove the securing clips, which are also located under the seat (which must also be removed), then you can proceed.

Once done, you will find a plastic cover on the right that needs to be removed to access the air filter. You can then extract the old unit and replace it with the new air filter of the same type.

Once done, refit everything.


Updated on 3 August 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a BMW R1200 GS Adventure
How to Replace the Air Filter on a BMW R1200 GS Adventure
R1200gs In this tutorial, you will learn how to remove and replace the air filter on a BMW R1200 GS Adventure motorbike. First, place your bike on the centre…
How to Perform a Service on the BMW R1200 GS
How to Perform a Service on the BMW R1200 GS
R1200gs This guide explains how to perform the routine maintenance service for the oil change on the BMW R1200 GS, following these simple steps. First, place…
How to Reset the "Service" Light on a BMW R1200 GS
How to Reset the "Service" Light on a BMW R1200 GS
R1200gs Before you begin, position your BMW R1200 GS on its side stand. Start by connecting the OBD reader to the bike's port. Next, open the "MOTO SCAN" app…

How to Assemble the Engine Block of the Husaberg FE 501

Here are the instructions to assemble the engine block of the Husaberg FE 501 enduro bike. First, assemble the engine transmission by installing the gear ratios and then the clutch assembly; after that, install the engine's thermal part by reassembling the crankshaft and then the cylinder head assembly (including piston, cylinder, and head), as shown in the video. At this point, install the stator and flywheel, as well as the electrical components of the engine, following the video tutorial to the end for reassembly!

Watch the video!


by ScegliAuto

More videos