Do it yourself
Frequently asked questions about cars and motorcycles

How to Perform a Service on the BMW R1200 GS

Model: Bmw R1200gs
Part: Engine oil

Video tutorial

This guide explains how to perform the routine maintenance service for the oil change on the BMW R1200 GS, following these simple steps. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine using a socket spanner; then, unscrew the oil filter cartridge located right next to it using the appropriate tool.

At this point, replace the filter with a new one, lubricating the seal and tightening it gently; now pour in the new engine oil!


Updated on 10 June 2026 by ScegliAuto


Related tutorials

R1200gs This tutorial shows how to reset the service on the BMW R1200 GS, a very simple and quick operation to perform only after completing all required sch…
R1200gs Before you begin, position your BMW R1200 GS on its side stand. Start by connecting the OBD reader to the bike's port. Next, open the "MOTO SCAN" app…
R1200gs In today's video, you will perform a very simple maintenance task on the BMW R1200 GS. Specifically, you will replace the air filter in the BMW R1200…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos