Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, you will learn how to change the engine oil on your Piaggio Liberty 50. It is not a very complex task; just take some care, and you can do it without needing a specialist. First, remove the oil filler cap (to avoid creating a sealed chamber when you remove the oil drain plug). Now, proceed to remove the oil drain plug (place a container underneath the bike to collect the oil). Clean the oil filler cap with a cloth, then you can refit the oil drain plug, add the oil, and screw the filler cap back on.

Updated on 9 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Change the Engine Oil on the Piaggio Liberty 50 - 125
How to Change the Engine Oil on the Piaggio Liberty 50 - 125
Liberty 50 In this video, you will learn how to change the engine oil as part of the regular maintenance service on the Piaggio Liberty 50 scooter (also applica…
How to replace the engine oil of the Piaggio Liberty 50
How to replace the engine oil of the Piaggio Liberty 50
Liberty 50 Replacing the engine oil on the Piaggio Liberty 50 does not require the use of special tools; let's see how to perform the routine maintenance check.…
How to change the engine oil of a Piaggio Liberty 50?
How to change the engine oil of a Piaggio Liberty 50?
Liberty 50 To change the motor oil of a Piaggio Liberty 50, follow these steps. Start by placing the scooter on a flat surface and making sure the engine is war…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos