Do it yourself
Frequently asked questions about cars and motorcycles
In this video tutorial, you will learn how to remove and replace the battery on a Piaggio Vespa GTS 250-300. First, remove the screws from the central plastic panel of the footrest to take it off; then access the battery, where you will disconnect the two terminals (positive and negative) to extract the battery. At this point, replace it with a new one of the same amperage, and refit it in the battery compartment, reconnecting the terminals by tightening the nuts. Finally, replace the plastic footrest and screw in the fixing screws!

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Vespa Gts 250 In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the…
Vespa Gts 250 In today's tutorial video, we will see how to remove and replace the engine air filter on the Piaggio Vespa GTS 250, as well as the 300, in simple an…
Vespa Gts 250 In this tutorial video, learn how to remove and replace the air filter on a Vespa GTS 300. First, use a T20 Torx screwdriver to unscrew the screws of…

How to Remove the Engine from a KTM EXC 300?

To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos