Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video tutorial, you will see how to dismantle and replace the rear headlamp bulb on a Piaggio Beverly 250 ie in simple steps. First, remove the top box by unscrewing the fixing screws and take off the upper plastic of the tail section; then remove the side plastics of the lamp and unscrew the fixing screws located underneath. At this point, pull out the lamp and remove the bulb holder along with the bulbs to replace them with new ones. Finally, reassemble everything by applying the reverse procedure!

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Pads on a Piaggio Beverly 250
How to Replace the Rear Brake Pads on a Piaggio Beverly 250
Beverly 250 Ie To replace the rear brake pads on the Piaggio Beverly, loosen the bolts securing the caliper to the brake disc so that it can be completely removed. …
Replacing the Front Brake Pads on the Piaggio Beverly Scooter
Replacing the Front Brake Pads on the Piaggio Beverly Scooter
Beverly 250 Ie Before proceeding with the replacement of the front brake pads on the Piaggio Beverly scooter, ensure that your motorcycle is stable and secure on a …

How to Replace the Front Headlight Bulb on the Suzuki GS 500?

In this tutorial, you will see how to replace the front headlight bulb on the Suzuki GS 500, a very simple and quick operation. Before proceeding, ensure that the key is not inserted to operate safely. Start by positioning yourself in front of the headlight in question, then locate the two screws at the bottom and unscrew them with a cross-head screwdriver. Next, separate the headlamp from the bracket, disconnect the power connector, and remove the rubber cap. At this point, simply unclip the metal clip, extract the old bulb, and fit the replacement.

Watch the video!


by ScegliAuto

More videos