Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the engine oil on a Ducati Monster 900, start by slightly warming up the engine to ensure that the oil is fluid. Make sure the motorcycle is on a flat and stable surface and lift the front part of the motorcycle using a center stand or suitable support. Locate the oil drain plug on the oil pan, usually located on the bottom side of the engine. Place an oil collection container under the drain plug. Unscrew the drain plug and let the old oil drain completely into the collection container. Once the draining is complete, remove and replace the oil filter. Make sure to lubricate the sealing ring of the new filter with engine oil before installing it. Tighten the drain plug with a torque wrench to the specified torque value from the owner's manual. Now, fill the engine with new engine oil, using the recommended oil for the Ducati Monster 900 and checking the level with the oil dipstick. Make sure not to exceed the maximum oil level, and you will have completed the replacement.

Posted on 22 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch on a Ducati Monster 900 S?
How to Replace the Clutch on a Ducati Monster 900 S?
Monster 900 S To replace the clutch on the Ducati Monster 900 S, loosen the screws securing the cover on the left side of the bike, in the central part of the cove…
How to change the motor oil of a Ducati Monster 900?
How to change the motor oil of a Ducati Monster 900?
Monster 900 S To change the oil of a Ducati Monster 900, start by making sure the motorcycle is parked on a flat and stable surface. Start the engine and let it ru…

How to Replace the Clutch Cable on the Royal Enfield Classic 350

In this guide, you will learn how to remove and replace the clutch cable on the Royal Enfield Classic 350 motorcycle. First, place your bike on the centre stand and begin unscrewing the adjuster located above the clutch cover on the left side; then detach the cable. Next, remove the cable from the clutch lever, pulling it out along with the outer casing. Now, replace it with the new, correct type, connecting the cable to the clutch lever. Finally, adjust the clutch to set the disengagement.

Watch the video!


by ScegliAuto

More videos