Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Fuel Tank from the Benelli TNT 125

Model: Benelli Tnt 125
Part:

Video tutorial

Today's guide will show you the steps to remove and replace the fuel tank of the Benelli TNT 125 motorcycle. First, place your motorcycle on a stand and begin removing the rider's seat; then unscrew the fastening screws found on the side of the tank and under the seat, removing the plastic fairings as shown in the video.

At this point, unscrew the screws of the fuel tank, disconnecting the hose and wiring underneath; if necessary, replace the fuel tank and reassemble everything!


Updated on 16 August 2026 by ScegliAuto


Related tutorials

Replacing the Spark Plug on the Benelli TNT 125
Replacing the Spark Plug on the Benelli TNT 125
Tnt 125 In this video, you will see the main instructions for removing and replacing the engine spark plug on the Benelli TNT 125, in simple steps. First, re…
How to Reset the Engine Light on a Benelli TNT 125
How to Reset the Engine Light on a Benelli TNT 125
Tnt 125 Before you can begin, sit on the seat of your Benelli TNT 125. Start by activating the instrument panel by turning the key in the ignition switch, th…
How to Dismantle the Engine of a Benelli TnT 125?
How to Dismantle the Engine of a Benelli TnT 125?
Tnt 125 To dismantle the engine of the Benelli TnT 125, loosen the bolts that secure the engine block to its housing, then free the block from the intake and…

How to Change the Transmission Oil on a Piaggio Vespa GTS Scooter

In this tutorial, you will see how to change the transmission oil on a Piaggio Vespa GTS scooter, a very simple operation applicable to all engine sizes. First, wait until the engine is completely cold, then position a container underneath the transmission area and, using a 6 mm hex socket spanner, unscrew the drain plug. Allow all the oil contained in the casing to drain out, reinsert the plug, and add the necessary amount of oil through the upper hole. You can use a pump or a syringe to assist with this.

Watch the video!


by ScegliAuto

More videos