Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the engine oil of the Sym Fiddle?

Model: Sym Fiddle
Part: Engine oil

Video tutorial

To replace the engine oil in the Sym Fiddle, you need to loosen the drain plug located in the lower center of the motorcycle: once this plug has been removed, you can let all the used oil flow into a properly positioned container. Once the oil has drained out, you can also remove the oil filter located next to the drain plug: now you can insert the new one and proceed with topping up. You can add the necessary amount of oil through the vent on the right side of the vehicle, near the exhaust.


Posted on 24 February 2025 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Gear Oil of the Sym Fiddle 125
How to Replace the Engine Oil and Gear Oil of the Sym Fiddle 125
Fiddle It is very simple to perform the routine maintenance service by replacing the engine oil and gear oil of the Sym Fiddle 125 scooter. First, place you…
How to Change the Engine Oil on the SYM Fiddle Scooter?
How to Change the Engine Oil on the SYM Fiddle Scooter?
Fiddle In this tutorial, you will see how to change the engine oil on the SYM Fiddle scooter, a very simple and quick operation. First, ensure that the engi…
How to Change the Gear Oil on a Sym Fiddle?
How to Change the Gear Oil on a Sym Fiddle?
Fiddle You can change the gear oil on a Sym Fiddle by loosening the drain plug located at the rear bottom of the scooter: once this plug is removed, you can…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos