Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Piaggio
    3. :
  3. Mp3
    4. : How do you change the Piaggio MP3 engine oil?

Model: Piaggio Mp3
Part: Engine oil
How do you change the Piaggio MP3 engine oil?

To be able to change the Piaggio MP3 engine oil, you need to unscrew the bolt located on the left side of the bike, in the central position. Once this bolt has been loosened, a tray must be suitably positioned under it, so that the used oil can be collected inside. Then it will be necessary to remove and replace the oil filter, which will be located at the bottom of the bike. To top up it will be necessary to insert a funnel in the filling hole on the right side of the bike, immediately above the muffler: then it will be possible to pour the necessary amount of oil.


Posted on 22 April 2024 by ScegliAuto



How do you change the Piaggio MP3 engine oil?
Mp3 The Piaggio MP3 engine oil change is carried out by unscrewing the oil drain plug which is positioned in the lower part of the bike, immediately in f
How to replace the engine oil in the Piaggio MP3 scooter?
Mp3 Replacing the engine oil in the Piaggio MP3 scooter, as we can see in this tutorial, is an extremely simple and fast operation. First of all, make su
How do you change the Piaggio MP3 engine oil?
Mp3 The Piaggio MP3 engine oil is replaced by loosening the oil tank drain plug and placing a container immediately below it: the drain plug will be loca

How to bleed the brake system of the Kymco GP125

The guide shows how to bleed the Kymco GP125 brake oil system. After securing the vehicle and protecting the upper fairing with rags, unscrew the two fixing screws of the brake fluid reservoir cap and remove the covers. Using an 8mm wrench, loosen the bleed valve on the front caliper and install the drain hose. Activate the brake to let the fluid flow out of the system. Remove the brake caliper, push the piston all the way and clean it with a special spray. Reassemble everything in place and, if necessary, top up the fluid. Check the correct functioning of the brakes before taking the road.

Watch the video!


by ScegliAuto

More videos