Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the ECU on the Vespa Primavera?

Model: Piaggio Vespa 150 Primavera
Part: Control unit

Video tutorial

To replace the ECU on the Vespa Primavera, open the glove compartment located just below the steering wheel and remove the tabs inside, both on the right and left sides. This will allow you to completely remove the front section containing the glove compartment and loosen the bolts securing the ECU supports.

The ECU must then be disconnected from its connector and replaced with the new spare part. The new ECU can then be connected to the connector and secured with the appropriate bolts.


Updated on 17 May 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Vespa Primavera 2024
How to reset the service light on the Vespa Primavera 2024
Vespa 150 Primavera The procedure that allows you to manually reset the service light on the display of your Vespa Primavera (2024) is really very simple. All you need t…
How to Replace the Wing Mirror on a Vespa Primavera 150
How to Replace the Wing Mirror on a Vespa Primavera 150
Vespa 150 Primavera To replace the wing mirror on the Vespa Primavera 150, you need to detach the supports located at the bottom of the windscreen so that it can be comp…
How to Replace the Battery in a Piaggio Vespa 150 Primavera?
How to Replace the Battery in a Piaggio Vespa 150 Primavera?
Vespa 150 Primavera To replace the battery in the Piaggio Vespa 150 Primavera, loosen the four T25 screws that secure the panel in the centre of the footwell of the scoo…

How to Change the Engine Oil on the BMW K1600?

To carry out the engine oil change on the BMW K1600, you need to loosen the drain plug of the oil sump, which is located at the central bottom of the vehicle: once this plug has been unscrewed, you can collect all the used oil in a suitably positioned container. At this point, you can remove the oil filter from its housing on the right side of the bike; after removal, you can top up through the breather located on the right side of the bike. Once topping up is complete, ensure everything is functioning correctly.

Watch the video!


by ScegliAuto

More videos