Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Transmission Oil of the Piaggio Xevo 125

Model: Piaggio Xevo 125
Part: Transmission fluid

Video tutorial

In this video tutorial, you will learn how to replace the transmission oil of the Piaggio Xevo 125 scooter by following the instructions below. First, place your scooter on the centre stand and begin removing the rear wheel, also disconnecting the suspension by undoing the bolt.

Next, unscrew the oil drain plug of the gearbox and let it drain into a container for about ten minutes. At this point, unscrew the filler cap and pour in the new transmission oil of the correct type (in this case, 80w90), following the video to the end!


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on a Piaggio Xevo 125?
How to Replace the Battery on a Piaggio Xevo 125?
Xevo 125 To replace the battery on a Piaggio Xevo 125, lift the seat to access the compartment underneath. At the front, you will find a protective cover that…
How to Replace the Air Filter on a Piaggio XEvo 125
How to Replace the Air Filter on a Piaggio XEvo 125
Xevo 125 In this video tutorial, you will learn how to remove and replace the engine air filter on a Piaggio XEvo 125 scooter in simple and quick steps. First…
How to Replace the Rear Light Bulbs of the Piaggio Xevo
How to Replace the Rear Light Bulbs of the Piaggio Xevo
Xevo 125 In this short and simple guide, you will learn how to dismantle and replace the rear light bulbs of the Piaggio Xevo 125 scooter, as well as the 250.…

How to Replace the Headlight Bulbs on the Triumph Speed Triple 765 R?

In this tutorial, you will see how to replace the headlight bulbs on the Triumph Speed Triple 765 R, a very simple and quick operation. First, ensure that the key is not inserted, then locate the large cap at the back of the headlight and remove it by turning it counterclockwise. Next, disconnect the power connector, unclip the metal clip, and remove the old bulb from the housing. At this point, simply insert the replacement and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos