Do it yourself
| ||||
|
Model: Piaggio Xevo 125
In this short and simple guide we will see how to disassemble and replace the rear light bulbs of the Piaggio Xevo 125 scooter, but also on the 250. First of all, we put our scooter on the central stand and start opening the saddle; then we open the rear flap and unscrew the two fixing screws that we find on the plastic bulkhead, behind the light, as shown in the video. At this point remove the headlight from the outside and disconnect the electrical connector of the lights; we remove and replace the small bulb bulbs, having the same socket as the original ones!
Posted on 10 June 2023 by ScegliAuto
|
How do you change the engine oil of the BMW R 1200 GS?The replacement of the engine oil of the BMW R 1200 GS is carried out by loosening the bolts that secure the skid plate positioned in the lower part of the bike. Once this plate has been removed, it will be possible to unscrew the drain plug below, so that the used oil can be collected inside a suitably positioned container. Next to the drain plug you will find the oil filter, which in turn must be extracted and replaced with a new one. After the replacement, it will be possible to top up from the special vent on the crankcase to the left of the bike. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |