Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Vespa Primavera 150

Model: Piaggio Vespa 150 Primavera
Part: Air filter

Video tutorial

To replace the air filter on a Vespa Primavera 150, loosen the screws securing the cover located near the rear wheel on the left side of the scooter. Once these bolts are loosened, lift the seat and remove the under-seat compartment to access the screws holding the cover from the inside.

At this point, you can remove the cover and replace the filter inside. After installing the new filter, refit the cover and insert the under-seat compartment.


Updated on 3 June 2026 by ScegliAuto


Related tutorials

How to Replace the Wing Mirror on a Vespa Primavera 150
How to Replace the Wing Mirror on a Vespa Primavera 150
Vespa 150 Primavera To replace the wing mirror on the Vespa Primavera 150, you need to detach the supports located at the bottom of the windscreen so that it can be comp…
Engine Oil and Oil Filter Replacement on Piaggio Vespa 150 Primavera
Engine Oil and Oil Filter Replacement on Piaggio Vespa 150 Primavera
Vespa 150 Primavera In this video tutorial, you will learn how to replace the engine oil and the oil filter while performing the regular maintenance service on a Piaggio…
How to Replace the Battery in a Piaggio Vespa 150 Primavera?
How to Replace the Battery in a Piaggio Vespa 150 Primavera?
Vespa 150 Primavera To replace the battery in the Piaggio Vespa 150 Primavera, loosen the four T25 screws that secure the panel in the centre of the footwell of the scoo…

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos