Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement on Piaggio Vespa 150 Primavera

Model: Piaggio Vespa 150 Primavera
Part: Engine oil

Video tutorial

In this video tutorial, you will learn how to replace the engine oil and the oil filter while performing the regular maintenance service on a Piaggio Vespa 150 Primavera. First, remove the exhaust silencer by unscrewing the fixing screws with a socket spanner; then remove the oil drain bolt located on the right side and let it drain into a container.

Next, locate the oil filter right next to it and unscrew it; replace it with the new one by hand. Finally, pour the new engine oil into the designated fill hole!


Updated on 4 April 2026 by ScegliAuto


Related tutorials

How to replace the engine oil in the Piaggio Vespa 150 Primavera scooter?
How to replace the engine oil in the Piaggio Vespa 150 Primavera scooter?
Vespa 150 Primavera In this tutorial we can see how to replace the engine oil in the Piaggio Vespa 150 Primavera scooter, an extremely simple and fast operation. First o…
How to Adjust the Clock of the Piaggio Vespa 150 Primavera
How to Adjust the Clock of the Piaggio Vespa 150 Primavera
Vespa 150 Primavera Today's guide will show you how to adjust the clock of the Piaggio Vespa 150 Primavera scooter. First, place the scooter on the centre stand and turn…
How to Replace the Battery on a Piaggio Vespa 150 Primavera
How to Replace the Battery on a Piaggio Vespa 150 Primavera
Vespa 150 Primavera In this guide, see the instructions that will allow you to remove and replace the battery of the Piaggio Vespa 150 Primavera scooter. First, place th…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos