Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Clock of the Piaggio Vespa 150 Primavera

Model: Piaggio Vespa 150 Primavera
Part: Clock

Video tutorial

Today's guide will show you how to adjust the clock of the Piaggio Vespa 150 Primavera scooter. First, place the scooter on the centre stand and turn on the instrument panel; then navigate to the settings of the onboard computer using the selector found on the right, as shown in the video.

At this point, press and hold the "mode" button to enter and set the time, first setting the hour and then the minutes; finally, exit the settings menu to save all changes made, turning off the panel and starting the engine!


Updated on 11 September 2026 by ScegliAuto


Related tutorials

How to Set the Clock on a Vespa 150 Primavera?
How to Set the Clock on a Vespa 150 Primavera?
Vespa 150 Primavera To set the clock on a Vespa 150 Primavera, insert the ignition key and turn it to activate the instrument panel. Once it is on, press and hold the MO…
How to Set the Time on a Piaggio Vespa 150 Primavera
How to Set the Time on a Piaggio Vespa 150 Primavera
Vespa 150 Primavera This brief guide shows how to change the time on the display of the Piaggio Vespa 150 Primavera instrument panel. First, place the scooter on its cen…
How to Set the Clock on the Piaggio Vespa 125 Primavera
How to Set the Clock on the Piaggio Vespa 125 Primavera
Vespa 150 Primavera Below are the instructions to set the clock on the Piaggio Vespa 125 and 50 Primavera scooter. First, place the scooter on its stand and turn on the …

How to Dismantle the Engine of the Aprilia Leonardo?

To dismantle the engine of the Aprilia Leonardo, loosen the bolts securing it within its housing: once all the mounting bolts for the supports are loosened and the pipes and connectors are disconnected, you can remove the engine from its place. At this point, you can loosen the bolts securing the cylinder at the top of the bike, removing it along with the piston underneath. Once the connecting rod is freed from the crankshaft, you can open the engine block below and replace any internal parts if necessary.

Watch the video!


by ScegliAuto

More videos