Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on a Vespa 150 Primavera?

Model: Piaggio Vespa 150 Primavera
Part: Clock

Video tutorial

To set the clock on a Vespa 150 Primavera, insert the ignition key and turn it to activate the instrument panel. Once it is on, press and hold the MODE button located on the right side of the handlebars.

The hour will start to flash and can be adjusted by pressing the same button. Hold the button to confirm the hours and adjust the minutes using the same procedure.

Finally, press and hold the button again and release it to turn off the instrument panel.


Updated on 25 June 2026 by ScegliAuto


Related tutorials

How to Adjust the Clock of the Piaggio Vespa 150 Primavera
How to Adjust the Clock of the Piaggio Vespa 150 Primavera
Vespa 150 Primavera Today's guide will show you how to adjust the clock of the Piaggio Vespa 150 Primavera scooter. First, place the scooter on the centre stand and turn…
How to Set the Time on a Piaggio Vespa 150 Primavera
How to Set the Time on a Piaggio Vespa 150 Primavera
Vespa 150 Primavera This brief guide shows how to change the time on the display of the Piaggio Vespa 150 Primavera instrument panel. First, place the scooter on its cen…
How to Set the Clock on the Piaggio Vespa 125 Primavera
How to Set the Clock on the Piaggio Vespa 125 Primavera
Vespa 150 Primavera Below are the instructions to set the clock on the Piaggio Vespa 125 and 50 Primavera scooter. First, place the scooter on its stand and turn on the …

How to Replace the Front Brake Pads on an Aprilia RS 457?

The front brake pads on an Aprilia RS 457 can be replaced by unscrewing the bolts that secure the caliper to the corresponding disc, allowing it to be removed: once the caliper has been removed, you can slide out the pin that holds the pads in their place. At this point, remove the old ones to insert the new ones: these must be secured with the appropriate pin, so that you can then reposition the caliper onto the disc. Now, secure the caliper with the bolts to ensure that the brake is functioning.

Watch the video!


by ScegliAuto

More videos