Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on the Piaggio Vespa 125 Primavera

Model: Piaggio Vespa 150 Primavera
Part: Clock

Video tutorial

Below are the instructions to set the clock on the Piaggio Vespa 125 and 50 Primavera scooter. First, place the scooter on its stand and turn on the instrument panel.

Then, press the mode button located at the bottom right of the handlebars until you reach the clock setting. Hold the button to enter the setting mode, as shown in the video.

Now, adjust the hour first and then the minutes, finally exiting the setting to save the changes made. Turn off and on the panel to verify the changes have been saved!


Posted on 26 February 2026 by ScegliAuto


Related tutorials

How to Adjust the Clock of the Piaggio Vespa 150 Primavera
How to Adjust the Clock of the Piaggio Vespa 150 Primavera
Vespa 150 Primavera Today's guide will show you how to adjust the clock of the Piaggio Vespa 150 Primavera scooter. First, place the scooter on the centre stand and turn…
How to Set the Time on a Piaggio Vespa 150 Primavera
How to Set the Time on a Piaggio Vespa 150 Primavera
Vespa 150 Primavera This brief guide shows how to change the time on the display of the Piaggio Vespa 150 Primavera instrument panel. First, place the scooter on its cen…
How to Set the Clock on a Vespa 150 Primavera?
How to Set the Clock on a Vespa 150 Primavera?
Vespa 150 Primavera To set the clock on a Vespa 150 Primavera, insert the ignition key and turn it to activate the instrument panel. Once it is on, press and hold the MO…

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos