Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This brief guide shows how to change the time on the display of the Piaggio Vespa 150 Primavera instrument panel. First, place the scooter on its centre stand and turn on the instrument panel. Then, scroll through the options on the display using the button located at the bottom right of the handlebars until you reach the clock option, as shown in the video. At this point, select the option to enter the settings, changing the hours and minutes. Exit the settings to save the changes made!

Posted on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time on the Piaggio Vespa 150 Primavera Scooter?
How to Set the Time on the Piaggio Vespa 150 Primavera Scooter?
Vespa 150 Primavera In this tutorial, you will see how to set the time on the Piaggio Vespa 150 Primavera scooter, a very simple and quick operation to perform, for exam…
How to Adjust the Clock of the Piaggio Vespa 150 Primavera
How to Adjust the Clock of the Piaggio Vespa 150 Primavera
Vespa 150 Primavera Today's guide will show you how to adjust the clock of the Piaggio Vespa 150 Primavera scooter. First, place the scooter on the centre stand and turn…
How to Set the Clock on the Piaggio Vespa 125 Primavera
How to Set the Clock on the Piaggio Vespa 125 Primavera
Vespa 150 Primavera Below are the instructions to set the clock on the Piaggio Vespa 125 and 50 Primavera scooter. First, place the scooter on its stand and turn on the …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos