Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the spark plug on a Piaggio X8 250, you need to loosen the screw that secures the cover located on the right side of the scooter, just below the seat. By removing this cover, you will be able to disconnect the injector located above the spark plug, allowing it to be extracted from its seat using a suitable socket wrench. After the spark plug has been removed, insert the new one into its housing, connecting it to the injector. Finally, close the housing with the corresponding panel that was previously removed.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Coolant in a Piaggio X8 250
How to Replace the Coolant in a Piaggio X8 250
X8 250 In this brief and simple guide, discover how to replace the coolant in the Piaggio X8 250 scooter. First, place the scooter on its centre stand and b…
How do you replace the engine oil of the Piaggio X8 250ie?
How do you replace the engine oil of the Piaggio X8 250ie?
X8 250 In order to replace the engine oil of the Piaggio X8 250ie, you need to loosen the drain plug of the oil pan, located in the central lower part of th…

How to Change the Engine Oil in a Royal Enfield 500?

In this tutorial, you will learn how to change the engine oil in a Royal Enfield 500, an extremely simple and quick operation to be performed every 12 months. First, ensure that the engine is cold, then place a container underneath and, using a 10mm socket, unscrew the two bolts related to the drain holes. Once the oil has drained from the system, open the filter cap using the same socket, insert the replacement, and reassemble everything in reverse order. Finally, pour in new 15W50 oil through the upper hole.

Watch the video!


by ScegliAuto

More videos