Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant in a Piaggio X8 250

Model: Piaggio X8 250
Part: Antifreeze coolant

Video tutorial

In this brief and simple guide, discover how to replace the coolant in the Piaggio X8 250 scooter. First, place the scooter on its centre stand and begin by unscrewing the drain screw located on the water pump cover; allow the fluid to drain into a container for about ten minutes.

Next, remove the plastic cover found to the right of the dashboard and unscrew the coolant filler cap; finally, pour in the new antifreeze suitable for your radiator, filling to the correct level!


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plug on a Piaggio X8 250
How to Replace the Spark Plug on a Piaggio X8 250
X8 250 To replace the spark plug on a Piaggio X8 250, you need to loosen the screw that secures the cover located on the right side of the scooter, just bel…
How to Change the Engine Oil of the Piaggio X8 250ie?
How to Change the Engine Oil of the Piaggio X8 250ie?
X8 250 To change the engine oil of the Piaggio X8 250ie, loosen the drain plug located at the bottom centre of the bike's oil sump. Once the plug is loosene…

How to replace the headlight bulb in the Triumph Tiger 800?

Replacing the headlight bulb in the Triumph Tiger 800, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the key is not inserted for safety, then locate the large cap on the back of the headlamp and unscrew it. Next, disconnect the power connector by pulling it outwards, unclip the metal clip, and remove the old bulb from the housing. At this point, insert the replacement, avoiding direct contact with the glass, and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos