Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Piaggio
    3. : Vespa Gts 150 : How to disassemble the rear wheel of the Piaggio Vespa GTS 150

Model: Piaggio Vespa Gts 150
Part: Wheel
How to disassemble the rear wheel of the Piaggio Vespa GTS 150

The guide shows how to disassemble the rear wheel of the Piaggio Vespa GTS 150. To be able to carry out the operation it is necessary to disassemble the muffler, using a 6 mm hex wrench, unscrew the two bolts of the muffler. From the inspection hatch on the platform, unscrew the two 10 mm bolts that block the exhaust pipe and remove the muffler. At this point, to make the operation easier, it is possible to lock the rear brake to prevent the wheel from turning. Straighten the hub cotter pin legs and remove it; extract the nut protection and unscrew, with a 24 mm spanner, the rim fixing nut. Remove the washer before the rim.


Posted on 18 December 2022 by ScegliAuto

How do you change the engine oil of the BMW R 1200 GS?

The replacement of the engine oil of the BMW R 1200 GS is carried out by loosening the bolts that secure the skid plate positioned in the lower part of the bike. Once this plate has been removed, it will be possible to unscrew the drain plug below, so that the used oil can be collected inside a suitably positioned container. Next to the drain plug you will find the oil filter, which in turn must be extracted and replaced with a new one. After the replacement, it will be possible to top up from the special vent on the crankcase to the left of the bike.

Watch the video!


by ScegliAuto

More videos