Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the maintenance light on the Piaggio MP3 500

Model: Piaggio Mp3 500
Part: Warning light – error code

Video tutorial

In this brief guide, we will see how to reset the maintenance light for the Piaggio MP3 500. Note that the following procedure is also valid for the MP3 300 model from the same manufacturer. To proceed, follow these steps in order: 1. Turn off the instrument panel if it is already on; 2. Press and hold the button on the right side of the rev counter; 3. While holding the right button, turn on the instrument panel; 4. Once on, continue to hold the right button for another 10-15 seconds; 5. Restart the panel to verify that the procedure has been successful.


Updated on 3 July 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Piaggio MP3 500
How to reset the service light on the Piaggio MP3 500
Mp3 500 Today we will explain how to reset the service light, related to the oil change, on a Piaggio MP3 500 vehicle on your own. Insert the key into the ig…
How to Reset the Service Light on a 2016 Piaggio MP3
How to Reset the Service Light on a 2016 Piaggio MP3
Mp3 500 In this guide dedicated to your 2016 Piaggio MP3 500, you will discover how to manually reset the service light. First, start the ignition and simult…
How do you reset the Service light on the Piaggio MP3 500?
How do you reset the Service light on the Piaggio MP3 500?
Mp3 500 To reset the Service light on the Piaggio MP3, you need to press and hold the button located in the bottom right of the central screen of the instrum…

How to Replace the Gear Oil of the Piaggio Vespa PX 125

To replace the gear oil of the Piaggio Vespa PX 125, loosen the drain plug of the oil reservoir located at the bottom of the transmission casing on the right side of the scooter. Once the plug is loosened, collect all the used oil in a suitably positioned container until it has completely drained. Now, top up the oil through the breather located on the transmission casing using a pump. After adding the new oil, you can start the engine to check that everything is functioning properly.

Watch the video!


by ScegliAuto

More videos