|
Do it yourself
| |||
| ||||
|
Model: Piaggio Vespa Gts 125
To change the engine oil of the Piaggio Vespa GTS HPE, loosen the screws securing the side protection panel of the rear wheel, located on the right side of the scooter: once this panel is removed, you can access the components underneath. Here, the oil drain plug must be removed to collect the used oil in a suitably positioned container; the oil filter can also be extracted from its housing and replaced with a new spare part. Finally, reinstall the wheel protection panel.
Updated on 23 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Vespa Gts 125
Below we will see the instructions that will allow us to adjust the stiffness of the rear suspension of the Piaggio Vespa GTS 125 scooter, but also o…
Vespa Gts 125
To replace the front indicator bulb on the Piaggio Vespa GTS 125, loosen the screw located at the bottom of the headlamp assembly. Once this screw is…
Vespa Gts 125
In order to disassemble the engine of the Piaggio Vespa GTS 125, you need to completely remove it from its housing: once these screws have been loose…
|
How to Replace the Air Filter on a Honda CB500X?
Replacing the air filter on the Honda CB500X, as shown in this tutorial, is a very simple and quick operation. First, remove the seat, then loosen the nut securing the negative terminal of the battery, disconnect it, and repeat the process for the positive terminal. Next, detach the upper strap, remove the battery, and unscrew the 4 screws securing the airbox cover. Once opened, you can extract the old filter, remove any residue present in the housing, and fit the new part. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.036
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
