Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Brake Pads on a Piaggio Vespa 150 Primavera

Model: Piaggio Vespa 150 Primavera
Part: Brake pads

Video tutorial

Below, you will find the steps to remove and replace the front brake pads on the Piaggio Vespa 150 Primavera, as well as on all other models of different engine sizes. First, place the scooter on the central stand and begin by removing the front wheel; then unscrew the fixing screws of the brake caliper, removing the pads located inside, as shown in the video.

At this point, clean the caliper of any residual dirt by pressing on the piston; install the new pads and reassemble everything!


Updated on 24 August 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Piaggio Vespa 150 Primavera?
How to Replace the Battery in a Piaggio Vespa 150 Primavera?
Vespa 150 Primavera To replace the battery in the Piaggio Vespa 150 Primavera, loosen the four T25 screws that secure the panel in the centre of the footwell of the scoo…
How to Set the Time on a Piaggio Vespa 150 Primavera
How to Set the Time on a Piaggio Vespa 150 Primavera
Vespa 150 Primavera This brief guide shows how to change the time on the display of the Piaggio Vespa 150 Primavera instrument panel. First, place the scooter on its cen…
How to Replace the Battery on a Piaggio Vespa 150 Primavera
How to Replace the Battery on a Piaggio Vespa 150 Primavera
Vespa 150 Primavera In this guide, see the instructions that will allow you to remove and replace the battery of the Piaggio Vespa 150 Primavera scooter. First, place th…

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos