Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on a Piaggio Vespa LX 125

Model: Piaggio Vespa 125 Lx
Part: Exhaust muffler

Video tutorial

To replace the exhaust on a Piaggio Vespa LX 125, you need to loosen the screws that secure the exhaust terminal to its housing: this is located on the right side of the scooter, near the rear wheel. Once the screws securing the supports are loosened, you can widen the ring that connects the exhaust terminal to the remaining part of the pipe: then you can completely remove the exhaust, allowing you to insert the new one. After securing and connecting the new exhaust properly, check that everything functions correctly.


Updated on 2 September 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust on a Piaggio Vespa LX 125
How to Replace the Exhaust on a Piaggio Vespa LX 125
Vespa 125 Lx The procedure for replacing the exhaust on the Piaggio Vespa LX 125 involves loosening the screws that secure the exhaust tip to its housing: this wi…
How to Remove the Rear Wheel of the Piaggio Vespa LX 125
How to Remove the Rear Wheel of the Piaggio Vespa LX 125
Vespa 125 Lx This guide shows the steps to remove and replace the rear wheel of the Piaggio Vespa LX 125 scooter, following the instructions below. First, place t…
Replacing the Battery on a Piaggio Vespa LX 125
Replacing the Battery on a Piaggio Vespa LX 125
Vespa 125 Lx In this guide, you will learn how to remove and replace the battery of a Piaggio Vespa 125 LX. First, open the seat by turning the key; then remove t…

How to Replace the Front Brake Pads on a Keeway Cafe Racer 152

To replace the front brake pads on the Keeway Cafe Racer 152, first, remove the screws securing the front brake caliper so that it can be completely detached from its disc. Once the caliper is removed, use a tool to pry out the pads inside. After the old pads are removed, insert the new ones into the caliper, securing them with the appropriate pin and positioning everything onto the disc. Once the caliper is secured with the bolts, check that the brake functions correctly.

Watch the video!


by ScegliAuto

More videos