Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Ciao
Part: Spark plugs

Here are the instructions to remove and replace the spark plug on the Piaggio Ciao engine, as well as the Si and Bravo models. First, place the central stand and start by disconnecting the spark plug cap found on the cylinder head; then use the spark plug spanner provided in the kit or a socket wrench with an extension to unscrew and remove the spark plug, as shown in the video. At this point, clean or directly replace it, screwing it in by hand and then tightening gently with the spanner; reconnect the spark plug cap.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Check the Spark Plug Function on the Piaggio Ciao
How to Check the Spark Plug Function on the Piaggio Ciao
Ciao Today's guide will show you the steps to disassemble and check the function of the spark plug on the Piaggio Ciao. First, put the central stand down …
How to Replace the Spark Plug on a Piaggio Ciao?
How to Replace the Spark Plug on a Piaggio Ciao?
Ciao To replace the spark plug on a Piaggio Ciao, remove the protection panel located immediately behind the front wheel. Once the panel is removed, disco…
How do you replace the spark plug of the Piaggio Ciao?
How do you replace the spark plug of the Piaggio Ciao?
Ciao To replace the spark plug of the Piaggio Ciao, you need to locate the ignition coil, which is located on the side of the cylinder: this coil must be …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos