Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Liberty 50
Part: Wheel

Below we will see the steps that will allow us to disassemble and replace the front wheel and brake disc of the Piaggio Liberty 50 scooter. First of all, we put the scooter on the central stand and start unscrewing the central bolt of the front wheel, using a socket wrench with extension; then we unscrew the brake caliper bolts, as shown in the video. At this point, we unscrew the brake disc bolts if we want to remove it and replace it with a new one, also replacing the tire if necessary; we apply the reverse procedure for reassembly!

Posted on 11 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front brake pads of the Piaggio Liberty 50?
How do you replace the front brake pads of the Piaggio Liberty 50?
Liberty 50 It will be possible to replace the front brake pads of the Piaggio Liberty 50 by loosening the screws that secure the brake caliper to the correspond…
Replacing the Front Headlamp Bulb on a Piaggio Liberty
Replacing the Front Headlamp Bulb on a Piaggio Liberty
Liberty 50 In this short guide, learn the instructions that will allow you to remove and replace the dipped beam bulb of the front headlamp on a Piaggio Liberty…
How to replace the battery of the Piaggio Liberty 50
How to replace the battery of the Piaggio Liberty 50
Liberty 50 Today we will see the instructions that will allow us to disassemble and replace the battery of the Piaggio Liberty 50 scooter, in simple and quick s…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos